Pink / White Noise Generators

The WNG-100 analog white noise generator contains a special sophisticated filter that removes all frequencies beyond the range of human hearing (click here to see spectrum analysis). This eliminates unnecessary loading that may otherwise be imposed on your audio system (unfiltered white noise can be hard on sound systems / tweeters). For a sample recording, go here.

Unit comes with wall adapater, RCA cables (for hook-up to external audio equipment), and owner's manual.

Note: If your sound system contains a graphic equalizer or a set of tone controls, the white noise signal can be attenuated to closely resemble pink noise by reducing the treble. Also, since the same signal is delivered to both output channels, the resulting sound will be in mono. Therefore, if you desire true stereo sound (stereo sounds richer and fuller than mono - the difference is incredible) two units are required. For stereo operation, you simply plug an RCA cable into each unit and then connect only one RCA plug from each cable (does not matter which ones - left or right channel) into your stereo system, leaving two plugs unconnected. Personally, I prefer mono sound even though it sounds more "plain".

                      WNG-100 White Noise Generator
                      $59.00
                                                                  US Customers only

All items sold on this website come with a 30-day money-back guarantee and a two-year warranty. For ordering information, click here (applies to US cutomers only).

SPECS
Power requirement: 9 - 24 VDC
Power consumption: 1.3 mA
Output jack: 3.5mm (1/8") stereo
Dimensions: L 4.2" W 2.8" H 1.0"
Frequency: 20Hz - 20,000 Hz
Output: Approximately 316mV RMS
Output impedance (each channel): 620 ohms
Crest Factor: 12 dB (4 mV / mV)